Specification:
Basic Information | ||
Description | Cisco SF350-24 24-Port 10/100 Managed Switch | |
Interface Port | ● 24 10/100 ports ● 2 Gigabit copper/SFP combo + 2 SFP ports |
|
Performance | Switching capacity : 12.8 Gbps ¦ Forwarding performance : 9.52 Mpps | |
RAM | 512 MB | |
Flash Memory | 256 MB flash | |
MTBF | 562,313 | |
Features Cisco SF350-24 24-Port 10/100 Managed Switch | Layer 3 switching, Layer 2 switching, DHCP support, VLAN support, IGMP snooping, syslog support, DoS attack prevention, port mirroring, DiffServ support, weighted round-robin (WRR) queuing, broadcast storm control, IPv6 support, multicast storm control, unicast storm control, firmware upgradable, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Trivial File Transfer Protocol (TFTP) support, access control list (ACL) support, quality of service (QoS), jumbo frames support, MLD snooping, SNMP, RMON, SNTP, Cisco Discovery Protocol, Auto SmartPorts | |
Unit Dimensions | 440 x 44 x 202 mm (17.3 x 1.73 x 7.95 in) | |
POWER/ RACK UNIT | 110V=240W 220V=230W |
|
POWER/ RACK UNIT | 2.72 kg (6.0 lb) | |
Temperature | 32° to 122°F (0° to 50°C) | |
Warranty | 1 Year |
Frame sizes up to 9K (9216) bytes supported on 10/100 and Gigabit interfaces
Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI
Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and monitoring
Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces.
Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface.
Wirespeed routing of IPv4 packets
Up to 1K static routes and up to 128 IP interfaces
Message | Contact US
Frame sizes up to 9K (9216) bytes supported on 10/100 and Gigabit interfaces
Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI
Reviews
There are no reviews yet.